[Elecraft] CW Pitch Resolution

[Robert G Strickland]

Bill...
Every time I attempt to use APF I encounter so much ringing that it's 
more or less unusable. I'd appreciate any hint that you might have about 
"taming" this feature for use. Thanks.
...robert

On 10/23/2013 15:29, Bill W4ZV wrote:
> drewko wrote
>> If you want to go lower than 300 Hz for your preferred cw pitch you
>> could offset the RIT for the lower tone then compensate with SHIFT to
>> bring it back to the center of the filter. A keyswitch macro could do
>> this automatically if you hve a set pitch in mind, say 270.
>
> That doesn't work if you're using APF, which I always use for weak signals.
> APF is linked to the actual PITCH setting.  I also use 200 Hz filters in
> diversity and 30 Hz away from their center would attenuate signals.
>
> 73,  Bill
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/CW-Pitch-Resolution-tp7579837p7580087.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Robert G Strickland, PhD ABPH - KE2WY
rcrgs at verizon.net.usa
Syracuse, New York, USA