[Elecraft] KPA 500 curious behavior

[Jack Brindle]

Bob;

Stopped displaying it on the LEDs, LCD (when selected) or both? 

Most likely the transmitter is not outputting more than 25 watts on that band, so it is below the minimum threshold needed to display this info.

Jack Brindle, W6FB


On Oct 24, 2013, at 10:41 AM, Robert Redmon <k5sm.bob at gmail.com> wrote:

> Sorry if this is a duplicate message, but the original didn't (apparently) show up in the archives this morning.
> 
> My KPA 500 has done something that confuses me. On _30 meters (only)_, it has stopped displaying PWR and SWR while in standby mode. Other bands work as always (displaying both pwr and swr when in standby). Anybody enlighten me about why?
> 
> Bob
> 
> -- 
> Robert Redmon K5SM
> AMA 58073
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html