[Elecraft] K3 Firmware

[Keith Heimbold]

Rudi,

I had similar issue running the firmware upgrade through my MicroHam microkeyer USB router. I am not sure if you are running your cable direct or through another system with virtual comports. Virtual comports seem to have issue with the firmware for the K3.

I didn't see if you mentioned anything but a direct connection but I thought I would bring up my similar experience.

Keith

Sent from my iPhone please excuse typos

> On Oct 14, 2013, at 6:05 AM, "Don Wilhelm" <w3fpr at embarqmail.com> wrote:
> 
> Rudi,
> 
> Did you look at the chart of error codes in the back of the manual and tried the correction steps given for that error?  That is the first step.
> 
> For ERR DSE, the correction is to reload the DSP firmware.  If you tried that and obtained the same error, download a new copy of the firmware from Elecraft and try again.
> 
> 73,
> Don W3FPR
> 
>> On 10/14/2013 3:43 AM, Rudi wrote:
>> Dear FM,
>> 
>> The upload for the new firmware makes me crazy.
>> 
>> I get error after te DSP 02.81 version.
>> 
>> 2 errors:
>> 
>> ERR DSE
>> ERR PL1
>> 
>> I noticed that the menu has strange letters but this is due to the fault
>> upload from de DSP firmware.
>> 
>> I tried different pc and have the latest version of the USB adapter.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html