[Elecraft] KX3 power on

[Alan Sewell N5NA]

Rod,

I saw your later post that you'd solved your problem.  I've had a 
similar problem but it's occurred when I've removed the serial cable 
from the rig.  Same symptoms as you report.

I've solved it by opening the KX3 and removing one battery for a few 
seconds then reinstalling.  After I do that my KX3 will power up normally.

73, Alan N5NA

On 10/13/2013 9:03 AM, elecraft-request at mailman.qth.net wrote:
> Message: 27
> Date: Sun, 13 Oct 2013 05:31:20 -0700 (PDT)
> From: Rod   G3YHM<rod.harvey at btinternet.com>
> To:elecraft at mailman.qth.net
> Subject: [Elecraft] KX3 power on
> Message-ID:<1381667480590-7579835.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
> Have just switched on my KX3 after non use of 1 month, will not work on
> batteries as they have discharged.  Also when I use external power source
> (13.5Volts) the following lights flash, TX. Delta f, OFS and B.  There is no
> Display.
>
> Has anyone had this problem and has a solution?
>
> Rod
>
> G3YHM