[Elecraft] SDR software for KX3?

[Tom]

Well I just tried nap3 and while I can get a spectrum there are so many artifacts it hardly seems worth it.
In order to rule out the soundcard I bought a emu0202 and by adjusting the two inputs I can lower the images but not entirely eliminate them.
I can run the optimization for images and it doesn't do much. So far the best I have obtained is with HDSdr but it really a far cry from something like the p3.
How is this posdible ? I thought SDR was the next best thing!
Tom




-------- Original message --------
From: Monty S <montys at mindspring.com> 
Date: 12/10/2013  16:40  (GMT-05:00) 
To: Tom <tomb18 at videotron.ca> 
Subject: Re: [Elecraft] SDR software for KX3? 
 
Tom,
I use NaP3 and it works fine.  Sounds like you need to tell your SDR program to invert the I and Q inputs

Monty K2DLJ

Sent from my iPhone

> On Oct 12, 2013, at 1:35 PM, Tom <tomb18 at videotron.ca> wrote:
> 
> Hi
> Has anyone tried to hook up their kx3 via the IQ output to SDR software?
> I have so far tried three different programs, hdsdr, sdr-radio, and SDR sharp, and they are all the same. I get images that run in different directions as I tune. I tried everything to get get rid of them to no avail.
> I also tried three different sound boards and different cables. No difference at all. Anybody have ideas?
> Thanks, Tom va2fsq
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html