[Elecraft] K3 and JT65-HF

[Joe Subich, W4TV]

 > 1.  What mode do I use?  I run AFSK in DATA A on RTTY, audio goes to
 > LINE IN, MIC+LINE is off.

Use DATA A with the same settings ...

> 2. What's the best way to key the K3? On RTTY, N1MM/MMTTY key the
> rig via the CAT port.

WSJT-X can key via software command, RTS or DTR *on a separate port*
or using DXLab Suite's CI-V Commander.  As an alternative you can
use VOX.

73,

    ... Joe, W4TV


On 10/12/2013 2:09 PM, Fred Jensen wrote:
> While putting Alpine County on the air for the Cal QSO Party, a couple
> of the crew were running JT65-HF prior to the contest start.  I thought
> I might try it out and need a couple of answers:
>
> 1.  What mode do I use?  I run AFSK in DATA A on RTTY, audio goes to
> LINE IN, MIC+LINE is off.
>
> 2.  What's the best way to key the K3?  On RTTY, N1MM/MMTTY key the rig
> via the CAT port.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2014 Cal QSO Party 4-5 Oct 2014
> - www.cqp.org
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>