[Elecraft] [K3] KDVR3 re-transmiting received audio question

[Cady, Fred]

Hi Dale,
The TX equalization is saved in a configuration file, so you can save the configuration you have with the TX equalization and then set a flat equalization and save that configuration. It takes a few seconds to restore a configuration but that's one way to change from one to another.
Cheers,
Fred KE7X

Fred Cady
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
www.ke7x.com or www.lulu.com
(Working on "The Elecraft K-Line: KPA500 and KAT500")
fcady at ieee dot org

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of dmb at lightstream.net
> Sent: Monday, October 07, 2013 10:55 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] [K3] KDVR3 re-transmiting received audio question
>
> I've encountered several instances where being able to play back a
> recording of a received SSB station would have been helpful to the
> other
> op in trying to diagnose a problem (RF feedback, distortion, mic gain
> level, etc...)
>
> A review of the KDVR3 documentation indicates that when re-transmitting
> previously received and recorded audio (not a message), the transmitted
> audio will be modified by the current TX Equalizer and Compression
> settings. For my intended usage, this would not be desirable since the
> transmitted audio wouldn't accurately reflect what was received.
>
> Is there by chance a KDVR3 option that bypasses the TX EQ and
> Compressor
> when re-transmitting *received* audio?
>
> 73, Dale
> WA8SRA
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html