[Elecraft] [K3] Filters for mixed JT65 and JT9 HF

[dberkley]

I don't have a solution for wideband transmit (since I don't own a K3) 
but there is a simple fix: Run split.  That way, the software will keep 
the transmit close to 1500 Hz by offsetting the QRG automatically.  You 
can use the full receive bandwidth and the software will take care of 
keeping the transmit in range.

I use this on my K2 and it is great.  You just have to set it in the 
WSJT-X settings and make sure the K3 is set in split mode.  On the K2, 
split is reset each time the transceiver is power cycled so I have to be 
sure to set it back on split mode.

73, David, K2MUN

On 10/6/13 3:41 PM, Michael Jensen [via Elecraft] wrote:
> Hi
>
> I am right now using this exact setup with WSJTX.
> I do get the about 400Hz to 4200 on the waterfall, but TX are an issue.
> As "i guess" the K3 transmit through the 2,8 Khz. filter when ever i 
> try to work a JT9 QSO above 3,0 Khz on the waterfall i do not see any 
> audio output. I have been looking for a way to TX through the AM 
> filter but have not found the way.
>
> Any hints please ?
>
>
> Thanks in advance
>
> 73 De OZ1BZJ
> Michael
>
> ------------------------------------------------------------------------
> If you reply to this email, your message will be added to the 
> discussion below:
> http://elecraft.365791.n2.nabble.com/K3-Filters-for-mixed-JT65-and-JT9-HF-tp7578942p7579617.html 
>
> To unsubscribe from [K3] Filters for mixed JT65 and JT9 HF, click here 
> <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7578942&code=ZGJlcmtsZXkyQGdtYWlsLmNvbXw3NTc4OTQyfDEyMTM3NzY1MDU=>.
> NAML 
> <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml> 
>





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Filters-for-mixed-JT65-and-JT9-HF-tp7578942p7579625.html
Sent from the Elecraft mailing list archive at Nabble.com.