[Elecraft] P3 question

[Mike K2MK]

Hi Gary,

The quickest way to determine if the P3 is talking to the K3 is to look at
the top of the P3 display. If the current K3 frequency is not displayed in
the center of the screen then you have not established communications.

73,
Mike K2MK


Garry Shapiro wrote
> I have had a P3 for some time but only very recently did I build it and
> install it, and only now am I trying to learn it.
> 
> The first problem encountered is as follows. I tried QSYing the K3 to a
> marker
> frequency, but no QSY occurs when either marker is selected and the
> Select knob is tapped. Yes, there is an RS232 connection between the K3
> and P3. The RS232 line also connects in parallel to a MicroHam router,
> and a SteppIR SDA100 controller through Y splitter cables. So I asked
> myself  "Are these additional breakouts preventing QSY to the marker
> frequency?" To answer, I disconnected the MicroHam and SteppIR
> controller, with no difference.
> 
> Am I missing something here? Is there an enabling configuration
> selection in the K3?
> 
> Garry, NI6T





--
View this message in context: http://elecraft.365791.n2.nabble.com/P3-question-tp7579558p7579563.html
Sent from the Elecraft mailing list archive at Nabble.com.