[Elecraft] Question about my kx3. Problem?

[Tom]

Hi
I could have sworn I saw it said "not inst"
I checked and it was at "nor"
Alls well now!
Thanks for the help!
Tom

Va2fsq.com




-------- Original message --------
From: Eric Swartz WA6HHQ - Elecraft <eric at elecraft.com> 
Date: 01/10/2013  22:40  (GMT-05:00) 
To: Tom <tomb18 at videotron.ca> 
Cc: Ray Sills <raysills3 at verizon.net>,Elecraft Mailing list <Elecraft at mailman.qth.net> 
Subject: Re: [Elecraft] Question about my kx3. Problem? 
 
This sounds that while you do not have the KXFL3 installed, it is still enabled in the KX3 set up menu. This will cause the KX3 to route signals through the wrong path to the non-existent KXFL3 when narrower RX bandwidths are dialed in. 

Disable the KXFL3 in the menu and you should be able to successfully dial the DSP down lower in BW without losing RX. 

73,

Eric
elecraft.com
---
Sent from my iPhone 5S

> On Oct 1, 2013, at 7:22 PM, Tom <tomb18 at videotron.ca> wrote:
> 
> No I do not have the roofing filters but even so, a cw signal without 400hz or less bandwidth is useless no?
> So, if you put the radio in dual watch mode and the VOA and fob frequencies are the same then guess what? You can get all the way down to 150.
> So what gives? Something isn't right
> Tom
> 
> 
> 
> 
> -------- Original message --------
> From: Ray Sills <raysills3 at verizon.net> 
> Date: 01/10/2013  21:45  (GMT-05:00) 
> To: Tom <tomb18 at videotron.ca> 
> Subject: Re: [Elecraft] Question about my kx3. Problem? 
> 
> HI Tom:
> 
> It appears that you do not have the roofing filter option.  I had the  
> same situation here, and was puzzled by it.   So, I just leave the  
> tuning above 2.0 and all is OK.
> 
> 73 de Ray
> K2ULR
> KX3 #211
> 
> 
>> On Oct 1, 2013, at 7:56 PM, Tom wrote:
>> 
>> Hi just put together my new KX3 but something seems amiss. I was  
>> tuning through the 40m cw band and I was not hearing any signals.. I  
>> then switched to web mode and there were tons as to be expected. So  
>> I put it back in cw mode and heard nothing tuning up and down the  
>> bands. I then adjusted the BW using the pbt and as soon as it gets 
>> to 2.0. I hear signals. Turn it down to 1.9 and nothing. Am I doing  
>> something wrong here? I'm used to a k3
>> Thanks, TOM
>> VA2FSQ
>> 
>> 
>> 
>> Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html