[Elecraft] Question about my kx3. Problem?

[Tom]

No I do not have the roofing filters but even so, a cw signal without 400hz or less bandwidth is useless no?
So, if you put the radio in dual watch mode and the VOA and fob frequencies are the same then guess what? You can get all the way down to 150.
So what gives? Something isn't right
Tom




-------- Original message --------
From: Ray Sills <raysills3 at verizon.net> 
Date: 01/10/2013  21:45  (GMT-05:00) 
To: Tom <tomb18 at videotron.ca> 
Subject: Re: [Elecraft] Question about my kx3. Problem? 
 
HI Tom:

It appears that you do not have the roofing filter option.  I had the  
same situation here, and was puzzled by it.   So, I just leave the  
tuning above 2.0 and all is OK.

73 de Ray
K2ULR
KX3 #211


On Oct 1, 2013, at 7:56 PM, Tom wrote:

> Hi just put together my new KX3 but something seems amiss. I was  
> tuning through the 40m cw band and I was not hearing any signals.. I  
> then switched to web mode and there were tons as to be expected. So  
> I put it back in cw mode and heard nothing tuning up and down the  
> bands. I then adjusted the BW using the pbt and as soon as it gets 
> to 2.0. I hear signals. Turn it down to 1.9 and nothing. Am I doing  
> something wrong here? I'm used to a k3
> Thanks, TOM
> VA2FSQ
>
>
>
> Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html