[Elecraft] MRP40

[Fred Smith]

Bruce it appears that you are correct after reading for a while, it appears
both of my radios cannot function with the same SDR software. Oh well I'll
try it on my KX3 first thanks for the input I did indeed misunderstand.

73,
Fred/N0AZZ 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bruce Beford
Sent: Sunday, November 24, 2013 12:54 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] MRP40

Fred, perhaps you misunderstood. 
To properly use the SDR version of this program, you need to present it with
both I and Q signals (in-phase and quadrature). These would be routed into a
2-channel (stereo) soundcard. So, you need the I/Q output from the K3,
provided by LP-Pan, SoftRock, or similar device. Then the 2 channel output
needs to be connected to a stereo "soundcard" input on the PC. I don't
believe the Signalink (USB?) is stereo, but I could be mistaken.
 
GL,
Bruce N1RX
 
> Thanks to both of you for your replies, it seems as if a SignaLink may
work
> with the SDR product going to check this out more.
 
> 73,
> Fred  N0AZZ

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2247 / Virus Database: 3629/6362 - Release Date: 11/24/13