[Elecraft] Reliable DC Power Supply for K3/P3
Josh Fiden
josh at voodoolab.com
Tue Nov 19 13:14:49 EST 2013
Hi Bob,
Just a note because the RS-50 is a real tank (heavy). I use 2x SS-30M
which power 5 high current devices (K3/P3, TS790A, IC910H and 2 brick
amps). Each power supply is only capable of powering one of these
devices during transmit, but since I don't transmit on multiple radios
concurrently, that's not a problem.
So, unless you need to transmit on the K3 and VHF radio at the same
time, you can get by with a smaller/lighter/cheaper supply. Of course
nothing wrong with overhead and room for expansion!
73,
Josh W6XU
On 11/19/2013 9:54 AM, Robert Nobis wrote:
> Everyone,
>
> Thank you. It looks like using an Astron supply is the way to go. I will
> probably go with the RS-50, as I also have a Yaesu 2M/70cm rig to power.
>
> Incidentally, this mailing list was one of the major reasons why I decided
> to get the Elecraft K3/P3 instead of competing products made in Japan. I
> have found the members of this list quick to respond to questions from
> others, with great answers.
>
> Again, thank you.
>
> 73,
>
>
> Bob - N7RJN
>
>
>
> On 11/19/13, 7:35 AM, "Robert Nobis" <N7RJN at nobis.net> wrote:
>
>> I m about ready to place an order for a K3 and P3, and wonder if there are
>> recommendations on a reliable DC power supply for the Elecraft 100-W
>> transceiver.
>>
>> 73,
>>
>> Bob - N7RJN
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list