[Elecraft] K3->SteppIR via Network?

[Mitch Wolfson DJØQN]

I use serial device servers in remote stations. The ones I use from 
Lantronix allow you to also connect via telnet. I have never tried using 
them that way, but I would assume that this would solve your problem.

73,
Mitch DJ0QN

On 17.11.2013 02:27, Martin wrote:
> Elecrafters,
> has anyone done this or has some advice:
>
> I plan to forward the frequency information from my K3 -wich is hooked 
> to a Windows machine - via Network to the remote SteppIR controler. 
> The controller connects to a RaspberryPI.
> So far, i can redirect the K3's serial output via TCP to a Linux 
> machine and watch the information using a telnet client. What i'm 
> looking for is a way to pass this output to a raspberryPI and hook the 
> controller to the PI's serial output.
>
> I tried ser2net on the raspberry, but no success.
> Anyone?
>
>
> -- 
> Mitch Wolfson
> DJØQN / K7DX
> Neubiberger Str. 21, 85640 Putzbrunn
> Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
> Echolink: 3001 - IRLP: 5378