[Elecraft] KX3 Please evaluate LiFePo4 battery/charger choice

[Arno Dienhart]

Looks very good, Dave. I like the extra capacity and the 4S2P configuration,
and if they came with a PCM or if there were a reasonably priced balancing
charger, I'd have considered that product. But I could not find it.

 

How is this capacity working for you?

 

To add some information about the Bioenno PCM that I hadn't found
before.from their website somewhere:


Bioenno PowerR 

Overcharge Protection for Each Cell: Min: 3.75 V; Typical: 3.80V; Max: 3.85
V

Over-charge Detection Delay: Min: 0.5 seconds, Typical: 1.0 seconds; Max:
1.5 seconds

Overcharge Recovery Protection for Each Cell: Min: 3.55V; Typical: 3.60V;
Max: 3.65V

 

Over-Discharge Protection for Each Cell: Min: 1.92V; Typical: 2.00V; Max:
2.08V

Over-discharge Protection Delay Time For Each Cell: Min: 0.5 seconds;
Typical: 1.0 Seconds; Max: 1.5 Seconds

 

Over-Discharge Recovery Protection for Each Cell: Min: 2.2V; Typical: 2.3V;
Max: 2.4V

Discharge Overcurrent Protection: 

Min: 35A; Typical: 42A; Max: 48A

Discharge Overcurrent Protection Delay Time: 20 ms

Balance Start Voltage: Min: 3.55V; Typical: 3.60V; Max: 3.65V

 

Balance Current: 

Min: 60 mA; Typical: 70 mA; Max: 80 mA

 

Over Temperature Protection (Charging): Min: 60 deg C; Typical: 65 deg C;
Max: 70 deg C

 

Over Temperature Protection (Discharging): Min: 60 deg ; Typical: 65 deg C;
Max: 70 deg C