[Elecraft] OT: Crimped PL-259s, recommendations?

[Mike Reublin]

A good way to get a nasty cut is to use a dull knife. It increases the chances of a slip. A sharp edge bites and holds, and requires a lot less force.

73, Mike NF4L
On Nov 12, 2013, at 1:26 PM, Phil Hystad <phystad at mac.com> wrote:

> An example:
> 
> http://www.youtube.com/watch?v=cmeC7PrulU8
> 
> 
> On Nov 12, 2013, at 9:18 AM, Hall, Nathon <HALL at cotr.bc.ca> wrote:
> 
>> I suspect that the 'crimped vs. soldered' thread will be shut down shortly, but here are my professional observations:
>> 
>> SDI-HD video is one of the most critical applications of coax cable in my job. We would *never* trust this signal to a soldered connector; they're all crimped. Yes, this is a slightly different cable than what we normally use in ham radio, but the extreme bandwidth of SDI-HD is a good test for any termination system. In radio cables outdoor or in high-vibration environments I will usually solder the centre pin of a crimp connector if a hole is provided to do so. This step is optional, but gives me a good feeling.
>> 
>> I have a range of crimping tools available to me: costing $25 - $1000+. I would trust all of them with cables and connectors intended for ham radio.
>> 
>> Soldering a PL-259 is something every ham should attempt at least once; sort of a rite of passage. After that, purchase a crimp tool and don't look back.
>> 
>> --
>> Nathon Hall   VE7ETS
>> SOTA VE7 (British Columbia) Association Manager
>> hall at cotr.bc.ca
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html