[Elecraft] P3 display "hanging"

[Vic K2VCO]

Hmm... I too am using fixed tune mode, and the DXlab Commander and have never noticed this 
problem. My poll rate in Commander is set slow, 300 ms.

On 11/11/2013 7:37 AM, Joe Subich, W4TV wrote:
>
> Paul,
>
> I have been using Fixed Tune mode with the P3 and Commander as
> long as it has been available in the P3 without any "hang".  I
> do keep Commander's Command Interval (polling rate) at 200 ms
> or higher (slower) but that is primarily to handle the worst
> case "dead time" in the K3 when changing bands.
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 11/11/2013 10:00 AM, Paul Saffren N6HZ wrote:
>> Hi Tim,
>>
>> Are you using Fixed Tune mode on the P3/SVGA?   In Fixed Tune mode, there is
>> quite a bit if information passing between the K3 and P3/SVGA and it sounds
>> like the Commander polling is affecting this communication.  Try using
>> Tracking Mode on the P3/SVGA and see if that solves the hanging problem and
>> let me know.
>>
>> -Paul-- 

Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/