[Elecraft] [KX3] Can't get CW decode to work

[Dave]

Hi Gary,

Let's get the obvious questions out of the way 1st...

1. You have pressed the "DATA" button in for more than about 1 second and 
moved the setting to 'RX THR1' through to 'RX THR9' ?
2. Have you tried the various different settings of THR<number> ?
3. Do you have the preamp on?  I find that, despite what it says in the 
manual, you need the preamp on for signals to be strong enough to set the 
decoder going.

Dave (G0DJA)


----- Original Message ----- 
Sent: Sunday, November 10, 2013 9:06 PM
Subject: [Elecraft] [KX3] Can't get CW decode to work


> I'm now the proud owner of a KX3 and for the most part have everything 
> setup and working.  The one thing I can't get to work currently is the CW 
> (and likely RTTY and PSK) decode.