[Elecraft] K1 Band Display Problem

[Don Wilhelm]

Eric,

You inadvertently changed a menu setting.

The band that is displayed is a menu setting.  Enter the menu and scroll 
to the "b3" setting - if it shows "b1" (or some different number), tap 
BAND until to changes to b3 - then EDIT the parameter - tap BAND to 
change it to 14 mHz.

73,
Don W3FPR

On 11/7/2013 1:16 PM, EricJ wrote:
> K1, SN 1976 with 1.09E firmware, 4 band module and ATU. It's been 
> working flawlessly since I built it around 2005 or so.
>
> It works fine on receive and transmit on all bands except that when 
> changing bands it displays 7, 10, 10, 21. Though indicating 10 mhz, it 
> works fine on 14 mhz, but the display is obviously wrong. Probably a 
> solder joint that decided not to work, but the LCD and added backlight 
> obscure pins on the firmware socket. I've resoldered pins on the LCD 
> and the firmware socket that I can reach. I've also removed the 
> firmware chip and reseated it. Problem surfaced suddenly on a camping 
> trip a couple weeks ago.
>
> Am I at least in the right area? If so, the next thing I'd do is try 
> to desolder the LCD and touch up solder joints on the firmware socket.