[Elecraft] [K3] fusing of 12 VDC output

[Don Wilhelm]

Pete,

The output is protected by a resettable fuse inside the K3.
If it trips, removing the overload and power cycling the K3 will reset it.

73,
Don W3FPR

On 11/2/2013 8:03 AM, Pete Smith N4ZR wrote:
> Working on a switching problem in the shack this morning, and thought 
> for a while that the fuse on the K3's 12 VDC output had popped.  It 
> wasn't so, but in reviewing both the manual and the Cody book, I could 
> not find any reference to the location or type of protection on this 
> DC output.  Can anyone clarify?
>