[Elecraft] K3 and Signalink USB

[David Sanders W4DES]

I'm using the SignaLink USB.  SignaLink sells various cables to hook up to different radios.  You need to get the cable part no. SLCABK3.  It plugs into the line input, line output and PTT input jacks on the back of the K3.  In addition, you will reconfigure some jumper wires inside the SignaLink USB.  Instructions come with the cable.
73,
David Sanders W4DES
K3 (7409)



On May 30, 2013, at 5:37 PM, Richard W Hemingway <rheming1 at sbcglobal.net> wrote:

> Hi,
> 
> I think that I may have messed up and it got away from me.  What I was asking is whether any of you are using SignaLink USB. Where do the cables plug in on the back of the K3. Do you have to turn on Data or can you use SSB?  I have written to SignaLink but have not received an answer.  I know that you don't have to use SL for PSK, and I may not go that way, but I have it for the rig I just sold and Would like to use it if I can.
> 
> Dick, N5XRD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html