[Elecraft] KPA500 & KAT500 in WPX

[Dick Dievendorff]

This can be avoided in the short term by sending a dit or by turning off memory tune on QSY. I'm going to try to address this in another way so the dit won't be needed. But we don't get freq info from the Radio other than band info and Tx freq count. 

Dick, K6KR

On May 30, 2013, at 11:46, Bob <WB4SON at gmail.com> wrote:

> Same thing here (shortened first element).
> 
> I've gotten into the habit of hitting the paddle and sending a dot or two
> after I QSY just to get the KAT500 Tuner on board.  Hopefully someday the
> K3 frequency could be shared with the KAT prior to transmit so that the
> relays can be propositioned.
> 
> 73, Bob, WB4SON
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html