[Elecraft] using the PR6

[iain macdonnell - N6ML]

You want to turn the internal pre-amp OFF when using the PR6, since
the PR6 should always have sufficient gain to overcome the K3
receiver's internal noise. The internal pre-amp won't add any value,
and could reduce your dynamic range.

73,

    ~iain / N6ML


On Thu, May 30, 2013 at 8:31 AM, Mike Sanders <k0az at centurytel.net> wrote:
> Bill, I have the PR-6 on my K3. Generally I leave the PRE on all the time
> unless
> it is necessary to drop it out due to very strong signals on the lower
> frequency
> bands. The only control I use is the RX ANT to switch the PR-6 in and out
> with
> the configuration you have on your set up. It is effective and is almost
> always
> on when I am on 6 meters with the K3. Enjoy your K3 on 6 as things are now
> popping on the band.   73
>
>
>              K0AZ
>        Mike Sanders
> EM37cd SW Missouri
>      www.k0az.com
>
>
>
>
>
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of William Hein
> Sent: Thursday, May 30, 2013 10:17 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] using the PR6
>
> I am slightly confused on the proper operation of the PR6.  I installed the
> PR6 on my K3 according to the instructions:
>
>         ** CTRL line used (supplied DB-15 connected to ACC port)
>
>         ** PR6  jumper P2 removed
>
>         ** CONFIG: DIGOUT1 ON set on 6m
>
> So, when I am operating on 6m do I select RX ANT and PRE or just RX ANT?  If
> just RX ANT is the appropriate protocol what will be the effect will
> selecting both PRE and RX ANT?  I've fuddled about with these buttons but
> would like to know the recommended procedure.
>
> 73
> Bill
>
> William Hein, AA7XT
> ex-AA4XT, NT1Y, AA6TT, KC6EDP
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html