[Elecraft] K3 Conflict with amp and Signalink

[K5HM]

I rechecked the Signalinlk cable and connected the PTT to PTT IN on the K3.
Works correctly.  It worked before, so I must have been dreaming about where
I had it connected.  

Probably senior moment.  Thanks to all.    

73,
Ron, K5HM
k5hm.ron at gmail.com
www.qrz.com/db/k5hm

________________________________________
From: Gerald Manthey [mailto:kc6cnn at gmail.com] 
Sent: Saturday, May 25, 2013 6:55 PM
To: K5HM
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Conflict with amp and Signalink

I have all those and can confirm the Signalink does not use key out. 
Gerald 
On May 25, 2013 5:28 PM, "K5HM" <k5hm.ron at gmail.com> wrote:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3.  Is there a solution that would not require unplugging
the Signalink sound card?

73,
Ron, K5HM
k5hm.ron at gmail.com
www.qrz.com/db/k5hm



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html