[Elecraft] K3 Setup Failing

[Brian F. Wruble]

OK, I will head in this direction.  I am using the USB to 232 cable from
Elecraft, and it was working fine at 4800.

I will report results.  Thanks for your help.

Brian



*Brian F. Wruble, C.F.A.

*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax  305.768.0278







On Sat, May 25, 2013 at 7:00 PM, Ed <edwest at sisqtel.net> wrote:

> What Don is saying is true.  My manual, page 58 shows the factory default
> as 4800 b.  Try resetting it to 38400 using the “config” menu.
> You will have to also do the same with your computer.  Then try reloading
> the software.  Anything you have saved with your present setup
> could be corrupted so you may have to start over.  38400 is what the K3
> and it’s companions want to communicate with.  Also not
> all RS232 to USB cables will work.  A lot of them have something missing
> in the chip they use.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>