[Elecraft] K3 Conflict with amp and Signalink

[Don Wilhelm]

Ron,

I have looked at the SignaLink USB information and see *no* connection 
for the KEYOUT line.  Yes, the SignaLink needs to be connected to the 
Line Out on the K3, but that is different than KEYOUT (PTT to the 
amplifier).

73,
Don W3FPR

On 5/25/2013 6:27 PM, K5HM wrote:
> The Signalink USB and the keying line for the linear amp both use the Key
> Out port on the K3.  Is there a solution that would not require unplugging
> the Signalink sound card?
>
>