[Elecraft] KAT Utility input using MAC

[David Fleming]

Hi Steve,

It may be that USB/Serial adapter you are using for the K3 and KPA500 are the older KUSB that uses the Prolific driver. The adapter that ships with the KAT500 (KXUSB) requires the FTDI driver. Try installing the FTDI driver on your Mac.

http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_2_18.dmg

David, W4SMT 


________________________________
 From: stephen arnold <stevekb9avs at gmail.com>
To: elecraft at mailman.qth.net 
Sent: Saturday, May 25, 2013 1:11 PM
Subject: [Elecraft] KAT Utility input using MAC
 

A little help, please.  

I am using a MacBook Pro for shack computer.  I am getting the K3 and KPA 500 firmware updates with no problem using this computer. 

However,  the KAT 500 tuner will not recognize the MAC for the initial utility download.  I am using the SerialPort 2 for K3 firmware which does not appear when I have attempted to upload the utility program into the tuner.  When I attempt to refresh Port List, the Serial port choices do not appear, and the computer and KAT 500 turner (a kit) do not recognize each other.

What have I missed, or, have I committed an error in the kit construction. 

Thanks,   Steve KB9AVS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html