[Elecraft] Rework eliminators

[Don Wilhelm]

Stan,

If you install the rework eliminators, I strongly recommend you do *not* 
change the value of C71 nor install D19 and D20 until you are actually 
ready to install the real K60XV option.

Those component changes will alter the VFO Range Select in a manner that 
cannot be properly tested until the K60XV is installed.
The other Rework Eliminators do not cause problems of that nature.

73,
Don W3FPR

On 5/21/2013 1:54 AM, Stan AE7UT wrote:
> I'm just starting a K2 build and was thinking about using the rework
> eliminators.
> I spoke with a tech at Elecraft today who was not real positive about them.
> He recommended just building it by the book.
> I have just the basic K2 but plan on putting all the options in over the
> next year.
>
>
> Thanks for any input you may have.
> 73
> Stan AE7UT
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Rework-eliminators-tp7573965.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>