[Elecraft] Fwd: K3/0 Question
Brandon Hansen [KG6YPI]
brandon at elecraft.com
Mon May 20 11:28:52 EDT 2013
Hello,
The "remote" K3 is powered on when the "control" K3 is powered on
and power off when the control K3 is powered off.
It is that simple ;)
73 for now
Brandon Hansen, KG6YPI
>> From: "bwruble at gmail.com" <bwruble at gmail.com>
>> Subject: Re: [Elecraft] K3/0 Question
>> Date: May 19, 2013 10:49:33 AM PDT
>> To: D Joyce <d_joyce at sympatico.ca>
>> Cc: Elecraft Reflector <elecraft at mailman.qth.net>
>>
>> Now I am confused.I liked Doug's first reply. Is that not the case? Someone else said the K3/0 will turn power off and on remotely at the slaved K3/100. Now I am hearing no it won't. Is that right?
>>
>> I am surprised if Elecraft designed things so that you can totally remote control EXCEPT for power.
>>
>> It is no trick to remotely control power to the DC supply, but the manual says if you shut the rig down there, there might be loss of some memory items.
>>
>>
>> --
>> 70 is the new 40.
>>
>> Brian F. Wruble, C.F.A.
>> 1107 Key Plaza, PMB 447 Key West, FL 33040
>> Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
>> eFax 305.768.0278 Skype bwruble
>>
>>
>> On May 19, 2013, at 1:28 PM, D Joyce <d_joyce at sympatico.ca> wrote:
>>
>>> Hi Iain: Thanks for the clarification - the units I spoke of below are both being used with the (Control & Radio) RRC-1258 equipments from Microbit (www.remoterig.com). Sorry I didn't make that clear.
>>>
>>> 73, Doug VE3MV
>>>
>>> ----- Original Message ----- From: "iain macdonnell - N6ML" <ar at dseven.org>
>>> To: "D Joyce" <d_joyce at sympatico.ca>
>>> Cc: <bwruble at gmail.com>; "Elecraft Reflector" <elecraft at mailman.qth.net>
>>> Sent: Sunday, May 19, 2013 12:42 PM
>>> Subject: Re: [Elecraft] K3/0 Question
>>>
>>>
>>>> I'm fairly sure that the K3/0 will NOT power off a remote K3. It
>>>> certainly won't power it on. However if you use it in conjunction with
>>>> a RemoteRig setup, that WILL handle power on/off of the remote K3.
>>>>
>>>> 73,
>>>>
>>>> ~iain / N6ML
>>>>
>>>>
>>>> On Sun, May 19, 2013 at 5:08 AM, D Joyce <d_joyce at sympatico.ca> wrote:
>>>>> GM Brian:
>>>>>
>>>>> The K3/10 I'm using and my friends K3/0 both used at control sites turn the
>>>>> power On & Off to the K3/100 used at the radio site, so I expect that the
>>>>> new "mini" K3/0 would as well. Suggest that you use an internet controlled
>>>>> switch to turn on the AC to the 12 V power supply and then the "Power"
>>>>> switch on the K3/0 will turn on and link to the K3/100. It all works very
>>>>> well.
>>>>>
>>>>> 73, Doug VE3MV
>>>>>
>>>>>
>>>>> ----- Original Message ----- From: "Brian F. Wruble" <bwruble at gmail.com>
>>>>> To: "Elecraft Reflector" <elecraft at mailman.qth.net>
>>>>> Sent: Sunday, May 19, 2013 7:41 AM
>>>>> Subject: [Elecraft] K3/0 Question
>>>>>
>>>>>
>>>>>
>>>>>> I was planning to use my K3, currently being built, remotely. I note in
>>>>>> the
>>>>>> operator's manual that you are advised not to interrupt power to the rig,
>>>>>> but to always use the power button to turn it on and off..
>>>>>>
>>>>>> That kind of kills my plans for remotely powering up and down using an
>>>>>> internet controlled switch.
>>>>>>
>>>>>> My question is:
>>>>>>
>>>>>> *Does the K3/0 handle power on/off for the K3?*
>>>>>> *
>>>>>> *
>>>>>> Tnx. 73 de Brian W3BW
>>>>>>
>>>>>>
>>>>>> *Brian F. Wruble, C.F.A.
>>>>>>
>>>>>> *70 is the new 40.*
>>>>>> *
>>>>>> Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
>>>>>> Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
>>>>>> eFax 305.768.0278
>>>>>> ______________________________________________________________
>>>>>> Elecraft mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>>>
>>>>>> This list hosted by: http://www.qsl.net
>>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
--
73,
Brandon Hansen, KG6YPI
831-763-4211 (x168)
K3-Remote Support
Elecraft
More information about the Elecraft
mailing list