[Elecraft] k3-kat500-pr6-DigiKeyer via 2 "Y" cable in "cascade" should be OK ?

[Greg]

That should be OK but quite the rats nest. :)  I would suggest either
an HD15 breakout board from Winford Engineering or see if you can find
one of the LDG RCA breakout boxes.  I have one of these and it works
great for accessing ACCY connections.

73
Greg


On 5/13/13, ik1bxn <ik1bxn at hotmail.it> wrote:
> Hello you all !
>
> Currently I have my k3 connected via an "Y" DB15 cable to KAT500 and cable
> and PR6.
> Now I'm purchasing a MicroHam DigiKeyer that needs to be connected to k3
> DB15 connector too and uses pins 1-4-5 for FSK and PTT.
> At the moment I have no place to plug DigiKeyer DB15 connector to.
> I wonder if it will be correct to purchase an additional "Y" DB15 and
> connect it in "cascade" to the "Y" I already have.
> The scenario it should be :
> 1st "Y" plugged to k3 and having one end to KAT500 and the 2nd end to feed
> the 2nd "Y".
> 2nd "Y" will feed PR6 at the 1st end and MicroHam DigiKeyer at the 2nd end.
> Should it be correct ? Should it create any problem or damage ?
>
> Hoping to have been clear enough, thanks a lot for support
>
> Best 73
>
> Giorgio - IK1BXN
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/k3-kat500-pr6-DigiKeyer-via-2-Y-cable-in-cascade-should-be-OK-tp7573626.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>