[Elecraft] K2: Low Output Only on 160M

[Michael Eberle]

Hi,

I am having problems with my output power on 160M.  It will only put out 
about 1.5 watts when set for 10 watts.  On all the other bands I am 
getting between 9.4 and 10.3 watts.
I have double checked capacitors in the BPF section, double checked 
capacitors and counted turns on toroid inductors on the low pass filter 
board and found nothing obviously wrong.
relay K3 is switching properly and I really don't know what else to 
check.  It is my guess that someone on here will know exactly what I did 
wrong or some other things to check.

Thanks,
Mike
KI0HA