[Elecraft] [K3} CW in SSB - no manual PTT?

[Joe Subich, W4TV]

 > Is this a configuration error on my part, or a firmware bug?

Neither - it is a feature.  Activating PTT activate SSB mode when in
SSB.

73,

    ... Joe, W4TV


On 5/9/2013 5:43 AM, Ian White wrote:
> When using the "CW in SSB" feature [1] my K3 will transmit CW using semi
> or full breakin, but not when using manual PTT. The footswitch and the
> XMIT button will switch the K3 into transmit, but then the CW keying is
> blocked.
>
> Is this a configuration error on my part, or a firmware bug?
>
>
> [1] In CONFIG - CW WGHT, tap 1 for SSB + CW (allows CW in SSB modes).
> The problem is independent of other options within this menu. It has
> also been around for a long time.
>
>
> 73 from Ian GM3SEK
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>