[Elecraft] K2 - KSB2

[Christophe F8ACF-56]

Good evening to all,

yes it is that it is written in pencil "3.6" on the back of the envelope

thank you again for your help
 
73 , Christophe F8ACF-56


________________________________
 De : Don Wilhelm <w3fpr at embarqmail.com>
À : Christophe F8ACF-56 <f8acf56 at yahoo.fr> 
Cc : "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
Envoyé le : Mardi 7 mai 2013 22h43
Objet : Re: [Elecraft] K2 - KSB2
 

Christophe,

Look on the other side of that crystal envelope.  You should find a 
number penned in by hand.  That is the number you need.
It is the nearest 100 Hz increment that the crystals were matched to.  
The crystals are actually matched closer than that (I recall matched to 
10 Hz), but that number is sufficient for setting the filter properly 
later in the alignment procedure.

73,
Don W3FPR

On 5/7/2013 4:04 PM, Christophe F8ACF-56 wrote:
> Hello list,
>
> in manufacturing manual it says:
>
> Locate the envelope containing the matched SSB filter crystals (X1-X7). On the outside of the
> envelope you'll find a calibration number that ranges between 3.2and 3.9. Record the number: ______.
> Note: If the envelope is unmarked, use 3.6
>
> in the accompanying photo, you have the crystal frequency and envelope
>