[Elecraft] KAT500 power source

[Dick Dievendorff]

It's not that critical. Just 11 to 14 volts or so at an ampere max. The positive is the center of the coaxial DC power connector. 

73 de Dick, K6KR

On May 1, 2013, at 19:20, SRD <software.research.development at gmail.com> wrote:

> Hi all,
> 
> I just put together a KAT500 and would like to be sure of this last step of
> supplying power to it.
> 
> I'm have the 18AWG Rg Angle cable shipped with it which plugs into the
> 11-15 VDC on the back of the KAT500. However, I'm not exactly sure if I
> have the right power for it. My power supply is an Alinco DM-330MV which
> has the +- clips on the lower left where I think this could go. Hoping
> someone can confirm.
> 
> http://www.alinco.com/Products/DM330MVE/
> 
> Though my version has MV and not MVE or MVT printed on it.
> 
> Any help much appreciated.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html