[Elecraft] K3 lock out via Inhibit

[Igor Sokolov]

Ian,
I agree with your note. Having said that there might be a possibility of yet 
another  menu setting that would allow different PTT/Inh interaction.
Only designers know what can be easily implemented and what cannot. Separate 
lockout box is not a problem for home station. Any extra box when you need 
to take rig far away is extra troubles.

73, Igor UA9CDC

----- Original Message ----- 
From: "Ian White" <gm3sek at ifwtech.co.uk>
To: <elecraft at mailman.qth.net>
Sent: Friday, March 29, 2013 2:19 PM
Subject: Re: [Elecraft] K3 lock out via Inhibit


>
>>I think it would be easily resolved if K3 firmware is changed so that
> Inh
>>signal disables PTT in at the same time.
>
> Many K3s are used with external sequencers which depend on the PTT/Inh
> logic remaining exactly as it is now.
>
> A far better place for specialized lockout logic is in a box between the
> two K3s.
>
>
> 73 from Ian GM3SEK
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html