[Elecraft] Filter help

[D Joyce]

Hi Bill:  To transfer the settings from the frequency from the main Rx to 
the Sub Rx just press A>B.  To transfer all the other relevant setting press 
the A>B button again right after the first time.  (see VFO Controlls (Upper 
Row) on pg 15 of the IB.  To do the filter selection in the Sub Rx using the 
XFIL button, hold the B Set and then use the XFIL to make the filter changes 
in the Sub Rx. (same IB reference).

73,  Doug  VE3MV


----- Original Message ----- 
From: "Bill W4RM" <W4RM at comcast.net>
To: <elecraft at mailman.qth.net>
Sent: Friday, March 22, 2013 5:25 PM
Subject: [Elecraft] Filter help


>I just install filters in my sub receiver to match my main receiver (1.8,
> 1.0 and 400Hz).  I have configured them using the K3 utility SW program 
> and
> it looks like they are set correctly in the program.  So now how do I make
> the sub receiver track the filter setting of the main receiver?  I.E. if I
> go to CW and select the FL4 400 HZ filter on the main receiver the SUB
> receiver doesn't  sound like the filter is selected.  Same case in SSB 
> with
> 1.8khz filter.  Also I don't understand how to manually select a filter on
> the sub receive like I can on the main receiver using the XFIL button.
>
>
>
> Any help would be great.
>
>
>
> 73 Bill  W4RM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>