[Elecraft] Knob

[jean louis]

Bonjour..

Some surprises this morning when i wanted to start my K3 to try to contact 
H44G on 14 Mhz RTTY .. No reception in Data !
(All was ok yesterday..)

- Checking antennas, Power supply etc..
- Exchange of the SignaLink modem with a spare. Checking wires .. No change.
- Removal of I / O modules in the late afternoon and after checking the 
surfaces.
- Getting Started with the device : all works again !

But ... When I made the inspection and tests during the blackout, the knob 
AF / SUB rotates in a vacuum !
With no sub RX in my RTX I've never used this button before.

It is slit lengthwise !   Is the same problem happened to a K3 owner ?

jean louis
F5NHJ
K2 / K3


>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 107, Issue 39
> *****************************************
>