[Elecraft] TX5K

[Dyarnes]

Yep, I worked them on 160 SSB on the 8th, which was apparently about the 
last day for that band.  I worked them on 160 CW a few days earlier.  Not 
sure why the antenna for 160 and 80 came down so early--maybe it blew 
down???  It seems like after they crossed the 100K QSO mark, their activity 
started to fall off.  Perhaps that was their goal, and after that they 
wanted to enjoy a little R & R?  Or, maybe the sand crabs got to them!  Hi.

Like you, I wasn't sure 160 SSB was on their agenda.  I don't think VP6DX 
brought up anything on 160 SSB, so maybe that's not considered to be a 
particularly productive band/mode combination.  In any event, the TX5K 
website had a neat feature that showed, at any point in time, just what 
bands and modes were active.  At this moment they are still only operating 
on 40 SSB.  It's odd to only see one position light on.  Usually there were 
at least 4 or 5, and as many as 7 or 8.

As I mentioned previously, my working them on 80 and 160 is still sort of 
amazing--to me anyway.  I say that because I've tried various "goofy" 
antennas on 160 before with almost no luck whatsoever.  An R8 vertical isn't 
supposed to work on 80, let alone 160.  I had tried it, mainly as a lark, on 
the VP6DX DXpedition.  Surprise!  Surprise!  They heard me!  You know my ERP 
had to be just one step up from a dummy load.  It's proof positive that just 
about anything will radiate something, and further provided whoever is at 
the other end has a decent antenna to hear you with!  The R8 actually shows 
a half-way decent SWR even without the tuner.  160 is more problematic, but 
the KAT500 (or just the K3 internal ATU when running barefoot) will bring it 
down to close to 1:1 on both bands.  That certainly substantiates some of 
the performance claims by Elecraft.  If you just don't get greedy, and run 
very much power, everything behaves nicely.

By the way, it was interesting to see them often on the same band with more 
than one mode.  Not all DXpeditions do that--at least not as much.  I think 
at least part of the credit for being able to do that is the Elecraft 
equipment.

Dave, AA7EE posted a link to a very interesting historical summary of 
Clipperton Island on the QRP-L reflector.  I've added the link below for 
those who may be interested.  I found it fascinating!

The other historical thing I am reminded of is that, back around the time I 
first got my license, there was a DXpedition to Clipperton Island by the 
YASME group--mainly Lloyd Colvin (W6KG?).  It was all over the cover of CQ 
Magazine.  Maybe that was the first DXpedition to Clipperton???  Do I also 
remember that later there was some sort of "flap" about YASME?

Here's the link on Clipperton's history.

http://www.damninteresting.com/the-tyrant-clipperton-island/

Dave W7AQK

-----Original Message----- 
From: Fred Smith
Sent: Saturday, March 09, 2013 3:13 AM
To: 'Dyarnes' ; elecraft at mailman.qth.net
Subject: RE: [Elecraft] TX5K

Did you work them on 160m phone (they weren't going to work 160 phone
according to them) I missed them on that and 12m SSB. Most all the early
info shows them shutting down today, haven't looked at their web site.

Good job to you! I hope we can work them as well on their next big
DXpedition (deep breath) I think a lot of people need it. These guys did a
great job and I liked the log as well as any I have ever seen.

BTW I tried for 20 mins the other morning after I had worked them QRO on 80m
SSB (1st call lucky) with my KX3 I was never heard. The noise floor was
rather high but I thought with their superior equipment 8>) that they might
hear me but no joy it was a poor band/mode choice, but I tried you never
know.

Fred/N0AZZ