[Elecraft] RC2 - high side and low side different

[Cady, Fred]

Ah yeah.  I forgot that! Thanks.


-----Original Message-----
From: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Sent: Friday, March 08, 2013 5:32 PM
To: Cady, Fred
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] RC2 - high side and low side different

Fred,

Your first post indicated that you could drive one from the high side
and the other from the low side.  If that is the case, then diodes are
not required.  If both must be driven from either the High side or the
Low side, then yes, diodes would be required.

73,
Don W3FPR

On 3/8/2013 6:47 PM, Cady, Fred wrote:
> Thanks Don,
> I guess not normally but I need to drive two separate devices -- the 
> ant switch with the tribander and a 6 band bandpass filter. 10-15-20 
> can be wired together to drive the ant switch but need to be separate 
> for the bandpass filter.
> Cheers,
> Fred
>