[Elecraft] K2 Low Power Out / Hi Current

[Don Wilhelm]

Jeremy,

What range is your external wattmeter set for?  If it is 100 watts or 
200 watts, you will probably not get any deflection at 2.4 watts.

When the load is 50+j0 ohms, you can rely on the K2 display.
I suggest removing the external wattmeter and using the display.

73,
Don W3FPR

On 3/6/2013 3:55 PM, JeremyJones wrote:
> Looks like a bad coax was indeed causing the high current issue.  I've
> resolved that, but I'm still show no power out on the external watt meter,
> while the internal is reading 2.4.
>
> Jeremy
> VA3ZTF
>