[Elecraft] K3 PSK no output

[K5HM]

Yup, I love the fact that I can look over all 4 Khz and narrow it down as
needed.  

73,
Ron, K5HM
k5hm.ron at gmail.com
www.qrz.com/db/k5hm

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Frantz
Sent: Monday, March 04, 2013 8:16 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 PSK no output

My computer software has a choice of waterfall bandwidth, 2K 
(from 400Hz to 2400Hz) or 4K (400Hz to 4400Hz). In both Data A 
and SSB I can adjust the DSP bandwidth up to 4200Hz on the high 
end which gives me most of the bandwidth of the 4K setting. Note 
that you will need a wider crystal filter than the 2.7KHz 
default to get the wider DSP bandwidths.

Most of the time I narrow the DSP bandwidth down to 100 to 250Hz 
for QSOs. It keeps strong stations from overloading my computer 
software input.

Don and Joe have described the advantages of Data A over SSB for data.

Cheers - Bill, AE6JV

On 3/4/13 at 3:47 PM, wm3m at live.com (WM3M) wrote:

>K3 does not have to be in Data mode to work with the Signalink.
>I use it all the time in SSB (USB) for data modes, especially for PSK31.
>Most data mode software has built in filtering/DSP so the wider 
>bandwidth on receive works very well, for PSK31, and other data modes.

-----------------------------------------------------------------------
Bill Frantz        | Truth and love must prevail  | Periwinkle
(408)356-8506      | over lies and hate.          | 16345 
Englewood Ave
www.pwpconsult.com |               - Vaclav Havel | Los Gatos, 
CA 95032

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html