[Elecraft] K3 Settings

[Cady, Fred]

Whoops. Wrong. NB and NR are not transferred to the Sub from main and
can be set independently with BSET. Sorry.

Fred Cady
fcady at ieee dot org 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Cady, Fred
> Sent: Sunday, March 03, 2013 5:11 PM
> To: n3rd at arrl.net; Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Settings
> 
> Hi Dave,
> I'm pretty sure AGC, NB and NR are the same on the main and the sub
rx.
> Double tapping A>B sets the filter settings (and freqs) the same. You
> can change the sub rx filter by holding BSET and then changing the
> filter, for example.
> Cheers and 73,
> Fred KE7X
> 
> Fred Cady
> "The Elecraft K3: Design, Configuration and Operation Second Edition"
> www.ke7x.com
> 
> fcady at ieee dot org
> 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> > bounces at mailman.qth.net] On Behalf Of Dave Hawes
> > Sent: Sunday, March 03, 2013 4:53 PM
> > To: Elecraft at mailman.qth.net
> > Subject: Re: [Elecraft] K3 Settings
> >
> > It is understood that you can't clone one K3 from another, but I
have
> > another
> > question:
> >
> > Can you clone the Main RX to the SUB?  I would like to be able to
> make
> > the
> > SUB exactly like the MAIN, especially AGC, NB, Width, Shift, etc.
It
> > would be
> > great if this could be done with a single command of some sort.
> >
> > 73 - Dave N3RD
> >
> > On 3 Mar 2013 at 15:35, David F. Reed wrote:
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html