[Elecraft] K3 & SDR/IQ

[KD7YZ Bob]

Howdy K3' people:

I have an SDR/IQ. I also have three Elecraft transverters. When I
connect a BNC to the BNC-RX "T" chain, and I tune Spectravue to 28.07
and the 6m xv50 transverter is "on", I am looking at the area around
50.070 .. I can look for beacons and Sporadic-E openings.

Nothing new.

However, the other day,  I suspected the xv50 transverter to on the
Fritz. So I switched to the internal 6m Rx/Tx section. Made some
contacts.

So now I want to once again look for 6m Beacons down below 50.080  .
My only option seems to be the IF BNC output.

I connected there and tried to set Spectravue for 8.215; 10.0; 28.0 and
still see nothing from 6m. I even tried to set it at 50.10, to no avail.

So how do yu set it up to watch lower end of 6m on the K3, without
using a transverter?

thanks


-- 
73
KD7YZ Bob