[Elecraft] RS-232 over WiFi

[Igor Sokolov]

I have set up KAT500 near the antenna and have about 40 meters run of CAT5 
ethernet cable from the shack. Pleased to report that it works well even in 
presence of 1KW RF going through the tuner into the antenna. 13.8 V DC power 
supplied to KAT500 through the same cable.

73, Igor UA9CDC

----- Original Message ----- 
From: "Poul Erik Karlshøj (PKA)" <PKA at telepost.gl>
To: <elecraft at mailman.qth.net>
Sent: Monday, June 24, 2013 8:40 PM
Subject: [Elecraft] RS-232 over WiFi


>I am considering to place the KAT-500 outdoor near the antenna like Knut 
>AB2TC has done (and reported to this group).
> Having looked on the internet for RS-232 to WiFi adapters I can find them 
> in the price range from as low as 40 USD to as much as 350 USD.
> I wasn't aware of the variety!
> I wonder if someone in this group has any experience (good or bad) with 
> RS-232 to WiFi units from:
> USConverters
> Nordfield
> USBGear
> ATC
> Lantronix
> Moxa
> Digi
> USR IOT
>
> 73 de OZ4UN
> Poul-Erik
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html