[Elecraft] KX3 Data A and AFSK-A Mode need help

[IZ4MJP.com]

After some trials i've found where the problem reside.

Put the KX3 in Data A Mode and Mix W in RTTY (with the use of AFSK instead of FSK) then in the menu "Mode" select the voice "Inverted".
In the status bar at the bottom of the window appear the word "iRTTY" instead of "RTTY"

Now i can correctly decode RTTY in Data A Mode USB and use the right BW.

Many thanks for your help.

73
Franco, IZ4MJP







Il giorno 12/giu/2013, alle ore 00:08, Don Wilhelm <w3fpr at embarqmail.com> ha scritto:

> Franco,
> 
> Have you tried setting MixW to RTTY normal and setting the K3 DATA A mode to reverse?  DATA A is normally LSB, if you hold ALT (left side of MODE button) it will go to USB.
> 
> 73,
> Don W3FPR
> 
> On 6/11/2013 12:02 PM, IZ4MJP.com wrote:
>> Hello Mat.
>> Many thanks for the answer.
>> 
>> I've already tried with RTTY-R but with no luck. In USB Mode or ASFK A no problem at all with the same settings.
>> 
>> I'll give a try using MMTTY (maybe MixW 3.xx doesn't love DATA-A, hi hi).
>> 
>> 
>