[Elecraft] K3 Display TX flashing

[Vic K2VCO]

Make sure TX INH is set to OFF.

On 6/11/2013 4:36 PM, Harlan wrote:
> OK gang.... I'm sure it's something very simple I am overlooking BUT.
> I understand the TX indicator on the display (not the TX led) flashes when in TEST mode, 
> or if transmit is inhibited externally. But, mine started flashing all the time.
> I have disconnected everything except mic, external speaker, power, and antenna.
> I have reloaded firmware.
> I have reloaded to an earlier configuration file.
> Nothing changes.
>
>  ALSO, don't know if this is associated or just a fluke, BUT my "monitor" function 
> doesn't work anymore either.
>
> What the............
>
> Harlan
> NC3C
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/