[Elecraft] Power on Banner reappears

[Don Wilhelm]

Dave,

That would indicate that the power is being momentarily disconnected 
from your KX3.
Wiggle the power connector and see if that induces it.
If so, there could be one of two things wrong (maybe more, but these 2 
occur to me).
1) You are using a 2.5mm power plug - the proper size is 2.1mm.
2) If you have an earlier KX3, the power jack may not have been glued to 
the board and one or more of the connections to the solder pads may have 
broken loose.  (I don't know the serial number when the gluing was started).

73,
Don W3FPR

On 6/11/2013 3:09 PM, Dave and Alice Billheimer wrote:
> The power-on banner in my KX3 comes on correctly, but it also reappears from time-to-time.
> I suspected my power supply, but have tried other power sources and the same thing happens.
> It usually happens at times when the bands are extra noisy.  Any ideas?
>
> Dave W1GQL
> 58 years of CW
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>