[Elecraft] k3 band up/down skips transverter band

[John D'Ausilio]

yep, that was it!

so many things I don't know about this radio ;)

tnx de w1rt/john


On Thu, Jun 6, 2013 at 11:20 AM, Dick Dievendorff <dieven at comcast.net>wrote:

> This is a guess, but there is a way to configure which bands are "mapped"
> by
> the band switch up/down.  See CONFIG:BND MAP.
>
> 73 de Dick, K6KR
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John D'Ausilio
> Sent: Thursday, June 06, 2013 5:41 AM
> To: Elecraft Reflector
> Subject: [Elecraft] k3 band up/down skips transverter band
>
> I'm getting ready to go out roving for the first time with a K3 as the IF
> radio for my low bands (6-432). I've programmed in transverter bands 1-3,
> but for some reason the rig skips 144 and goes to 222 on band up (and
> similarly skips 144 and goes to 50 on the way back down). If I direct freq
> enter a 144MHz frequency it correctly selects xv1, it just won't go there
> with the band up/down.
>
> Any ideas?
>
> de w1rt/john
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>