[Elecraft] K3 Frequency Memory Editor

[ANDY NEHAN]

Thanks its the 1.1.252.0 version and yes I am using it to program the K3. I found a later version (1.3.3.0)  which I downloaded and tried and got the same results - I did note 3 "Writememory2state.Ontimerexpiry" messages.

Hope this clarifies things.


Andy




________________________________
 From: Dick Dievendorff <dieven at comcast.net>
To: 'ANDY NEHAN' <andy.nehan at btinternet.com> 
Sent: Wednesday, 5 June 2013, 14:13
Subject: RE: [Elecraft] K3 Frequency Memory Editor
 

What K3 Frequency Memory Editor version are you using?  And you're using it
with a K3, not a KX3, right?

This is in the Help - About screen.

73 de Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of ANDY NEHAN
Sent: Wednesday, June 05, 2013 0:07 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Frequency Memory Editor

Hi, I have noted that when I use the above utility it does what I want apart
from the 50MHz band. I set it to the required frequency and mode (50.250 and
Data) yet when I upload that info to the K3 the mode becomes Data Rev. This
does NOT happen on any other band (and I use the memories to get me to the
PSK frequencies for all bands). On the other bands the frequency is correct
and the mode is Data.

I have tried changing the mode on the K3  to Data then reading that into the
K3 Frequency Memory Editor and then re-exporting it back to the K3 - but the
result is the same.

I guess it must be obvious what I am doing wrong but it sure is puzzling me
at the moment!!

Andy
G4HUE
K3 s/n 6990
P3 s/n 2493
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html