[Elecraft] K3 using Pixel magnetic antenna

[amsctalx at comcast.net]

I use a Pixel Technologies RF PRO-1B magnetic loop with my K3 (and other receivers). How precisely you would connect it will depend on whether you have the second receiver installed, but the basic way is to connect to the RX Antenna port. You have a couple of options for feeding the second receiver, depending on how you connected the antenna input. 

The Pro is very effective below 15M, allowing me to "null out" much of the urban noise I cope with. Highly recommended! 

73, 


Mike Alexander - N8MSA 



----- Original Message -----
From: "w9hak" <w9hak at twc.com> 
To: Elecraft at mailman.qth.net 
Sent: Tuesday, June 4, 2013 8:51:56 PM 
Subject: [Elecraft] K3 using Pixel magnetic antenna 

Has anyone used the Pixel magnetic antenna with 
their K3? I am instrested in your results and how 
you attached the Pixel antenna to your k3. 

Smith Bradford 
W9HAK 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html